Introduction of 1540 nm Fractional Er: Glass Laser:

1. MLA(micro lens array)

Better focusing than the scanner system LASER adopted
The MLA (micro lens array) for splitting the laser onto the skin. Comparing with scanner system of the fractional systems, the MLA system enables the narrow and deep MTZs' (micro thermal zone)-250 micro* 1mm. The narrow and MTZs' result in the real skin resurfacing where as other fractional ones generate just shallow MTZs' and reduces the effect of the treatment. Due to the MLA way, Er; Glass laser can precisely deliver the energy. In the fractional market, most of hi-brand fractional products adopt the MLA approach by the above reasons. The curvature of the lens is almost like the ball shape and it is particularly hi-tech. The MLA way gives less pain, less swelling, and less redness.

2. Erbium: Glass

Erbium: Glass penetrates deeper than CO 2.

Erbium: Glass Laser is adopted for the same purpose of the narrow and deep MTZs'. It results in the maximum efficacy of the treatment. The CO 2 Laser just scratches the skin surface instead of going deep into the skin because its water absorption rae is very high. The Erbium: Glass laser tends to be rather focused into the deep hole without being dissipated by the skin surface, For the long term effects with less down time, Erbium: Glass is best of choice of the laser source of the factional systems.

3. High energy(100mj) gives better efficacy
For the maximum efficacy of the treatment, the narrow and deep MTZs' should be created. In order of it, high energy around the 100mj for each microbeam is essential. Our equipment gives such high energy and results in 1mm deep hoes. These micro beams create narrow, deep columms of tissue coagulation, white sparing the tissue surrounding the columms from damage. Our laser source is Erbium: Glass of the wave length 1540nm with the maximum power of 100mj for each MTZ. Shallow holes of other fractional systems prevents the long term of effect of the skin resurfacing.

4. System Specification
Laser Type: 1540nm Er: Glass Laser
Operation Mode: Static
Energy: 1-12J
Frequency: 1Hz, 2Hz
Density: 100 or 300 Spots/cm 2
Handpiece Tip: 10mm (100 microbeams per cm 2 ) and 15mm (322 microbeams per cm 2)
Actuator: Footpedal
Display: 12.1 inch or 15 inch etc. Touch screen
Power input: AC 220V 60Hz/AC 110V 50Hz.
Current input: 10A
Weight: About 100Kg
Dimension: 600mm (W)X 720mm (D)X 980mm (H)
Option: Resurfacing Handpiece

Welcome your enquiry!